Question 1

Integer files are used to store numerical data that are used by math functions.

Accepted Answer

A) True 
 B)False

Question 2

When the input goes true,the value will be stored in F8:1 will be 24.8.

Accepted Answer

A) True 
 B)False

Question 3

PLC math functions perform arithmetic on values stored in memory words.
Multiple Choice Questions

Accepted Answer

A) True 
 B)False

Question 4

File arithmetic functions are used to perform arithmetic operations on:

Accepted Answer

A)  multiple words.
B)  integer numbers only.
C)  decimal numbers only.
D)  BCD numbers only.E) B) and D)
F) None of the above

Question 5

When the Full light is on:

Accepted Answer

A)  the weight of the vessel is 500 pounds or more.
B)  rung No.3 is always true.
C)  rung No.1 is always false.
D)  all of these.E) A) and B)
F) A) and C)

Question 6

Assume the upper and lower temperature limits are programmed for 2% instead of 1% and the preset is 400 °\degree° F.As a result,the number stored in N7:2 would be:

Accepted Answer

A)  392.
B)  390.
C)  388.
D)  386. E) None of the above
F) All of the above

Question 7

In the program shown,the value of the number stored in N7:2 is:

Accepted Answer

A)  172.
B)  601.
C)  325.
D)  348.E) C) and D)
F) A) and B)

Question 8

PL1 will be on whenever the current temperature is:

Accepted Answer

A)  greater than the preset temperature.
B)  less than the preset temperature.
C)  greater than the upper temperature limit.
D)  less than the lower temperature limit.E) None of the above
F) B) and D)

Question 9

For the program as shown,output PL1:

Accepted Answer

A)  would be energized.
B)  would not be energized.C) A) and B)
D) undefined

Question 10

Which of the following numbers stored in N7:3 will cause output PL1 to be energized?

Accepted Answer

A)  048
B)  124
C)  172
D)  325E) B) and C)
F) None of the above

Question 11

The number stored in word N7:1 represents the:

Accepted Answer

A)  weight of the empty vessel.
B)  preset weight of the vessel.
C)  current weight of the vessel.
D)  difference between the current and preset weight of the vessel.E) B) and D)
F) C) and D)

Question 12

The rung logic is telling the processor to multiply the values stored in word N7:2 and N7:1.

Accepted Answer

A) True 
 B)False

Question 13

The value of the number stored at Source B is:

Accepted Answer

A)  N7:8
B)  N7:16
C)  328
D)  528E) A) and C)
F) A) and D)

Question 14

The ability of a PLC to perform math functions is intended to:

Accepted Answer

A)  replace a calculator.
B)  multiply the effective number of input and output devices.
C)  perform arithmetic functions on values stored in memory words.
D)  all of these.E) None of the above
F) A) and B)

Question 15

The amount of overfill weight required to trigger the alarm is changed by changing:

Accepted Answer

A)  the value of the number stored at input 1:012.
B)  the value of source B of the GEQ instruction of rung 3.
C)  the value of source B of the GEQ instruction of rung 5.
D)  the value of the number stored in word N7:1.E) None of the above
F) A) and D)

Question 16

The value of the number stored in N7:1 is:

Accepted Answer

A)  90.
B)  45.
C)  35.
D)  60.E) All of the above
F) A) and C)

Question 17

Which constant stored in source B of the EQU instruction would turn PL1 on?

Accepted Answer

A)  24
B)  20
C)  6
D)  4E) None of the above
F) A) and B)

Question 18

PLCs can use numerical data from the accumulated values of timers and counters with math functions.

Accepted Answer

A) True 
 B)False

Question 19

The number stored in N7:1 represents the:

Accepted Answer

A)  upper temperature limit.
B)  lower temperature limit.
C)  current temperature of the oven.
D)  difference between the preset and current temperature.E) All of the above
F) A) and B)

Exam 11: Math Instructions

PLC math functions perform arithmetic on values stored in memory words. Multiple Choice Questions

Correct Answer
verified

In the program shown,the value of the number stored in N7:2 is:

Correct Answer
verified

File arithmetic functions are used to perform arithmetic operations on:

Correct Answer
verified

When the Full light is on:

Correct Answer
verified

PL1 will be on whenever the current temperature is:

Correct Answer
verified

For the program as shown,output PL1:

Correct Answer
verified

The ability of a PLC to perform math functions is intended to:

Correct Answer
verified

Which of the following numbers stored in N7:3 will cause output PL1 to be energized?

Correct Answer
verified

Which constant stored in source B of the EQU instruction would turn PL1 on?

Correct Answer
verified

The number stored in word N7:1 represents the:

Correct Answer
verified

PLCs can use numerical data from the accumulated values of timers and counters with math functions.

Correct Answer
verified

The number stored in N7:1 represents the:

Correct Answer
verified

Correct Answer
verified

The value of the number stored at Source B is:

Correct Answer
verified

The rung logic is telling the processor to multiply the values stored in word N7:2 and N7:1.

Correct Answer
verified

The amount of overfill weight required to trigger the alarm is changed by changing:

Correct Answer
verified

The value of the number stored in N7:1 is:

Correct Answer
verified

When the input goes true,the value will be stored in F8:1 will be 24.8.

Correct Answer
verified

Integer files are used to store numerical data that are used by math functions.

Correct Answer
verified

Exam 11: Math Instructions

PLC math functions perform arithmetic on values stored in memory words. Multiple Choice Questions

Correct AnswerverifiedShow Answer

In the program shown,the value of the number stored in N7:2 is:

Correct AnswerverifiedShow Answer

File arithmetic functions are used to perform arithmetic operations on:

Correct AnswerverifiedShow Answer

When the Full light is on:

Correct AnswerverifiedShow Answer

PL1 will be on whenever the current temperature is:

Correct AnswerverifiedShow Answer

For the program as shown,output PL1:

Correct AnswerverifiedShow Answer

The ability of a PLC to perform math functions is intended to:

Correct AnswerverifiedShow Answer

Which of the following numbers stored in N7:3 will cause output PL1 to be energized?

Correct AnswerverifiedShow Answer

Which constant stored in source B of the EQU instruction would turn PL1 on?

Correct AnswerverifiedShow Answer

The number stored in word N7:1 represents the:

Correct AnswerverifiedShow Answer

PLCs can use numerical data from the accumulated values of timers and counters with math functions.

Correct AnswerverifiedShow Answer

The number stored in N7:1 represents the:

Correct AnswerverifiedShow Answer

Assume the upper and lower temperature limits are programmed for 2% instead of 1% and the preset is 400 °\degree° F.As a result,the number stored in N7:2 would be:

Correct AnswerverifiedShow Answer

The value of the number stored at Source B is:

Correct AnswerverifiedShow Answer

The rung logic is telling the processor to multiply the values stored in word N7:2 and N7:1.

Correct AnswerverifiedShow Answer

The amount of overfill weight required to trigger the alarm is changed by changing:

Correct AnswerverifiedShow Answer

The value of the number stored in N7:1 is:

Correct AnswerverifiedShow Answer

When the input goes true,the value will be stored in F8:1 will be 24.8.

Correct AnswerverifiedShow Answer

Integer files are used to store numerical data that are used by math functions.

Correct AnswerverifiedShow Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified