Question 1

Once the proper extinguisher is selected, you must perform a visual inspection to ensure the extinguisher:

Accepted Answer

A)   has no external marks.
B)   is charged and operable.
C)   feels as though it contains agent.
D)   has a long enough hose to reach the fire.

Question 2

What type of portable fire extinguisher may be applied with either an extinguisher or a scoop?

Accepted Answer

A)   Dry powder
B)   Dry chemical
C)   Pump-type water
D)   Wet chemical stored-pressure

Question 3

How often should portable fire extinguishers be removed from service for maintenance?

Accepted Answer

A)   Monthly
B)   Bi-monthly
C)   Annually
D)   Bi-annually

Question 4

The P in the PASS acronym stands for:

Accepted Answer

A)   squeeze handles.
B)   aim nozzle at base of fire.
C)   sweep nozzle back and forth.
D)   pull pin by breaking wire or seal.

Question 5

Which method of extinguishing works by excluding oxygen from the burning process?

Accepted Answer

A)   Cooling
B)   Smothering
C)   Saponification
D)   Chain breaking

Question 6

What classification of portable fire extinguisher is used for fires that involve combustible metals and alloys?

Accepted Answer

A)   Class A
B)   Class B
C)   Class D
D)   Class K

Question 7

Do not remove the safety pin on a portable fire extinguisher until:

Accepted Answer

A)   ready to use the extinguisher.
B)   the fire appears to be dying out.
C)   ordered to by the commanding officer.
D)   you are 10 feet (3.04 meters)  from the fire.

Question 8

What classification of portable fire extinguisher is used on fires that involve combustible cooking oils?

Accepted Answer

A)   Class A
B)   Class B
C)   Class D
D)   Class K

Question 9

What type of portable fire extinguisher may produce a cloud that reduces visibility when discharged?

Accepted Answer

A)   Dry chemical
B)   Pump-type water
C)   Aqueous film forming foam
D)   Wet chemical stored-pressure

Question 10

What expelling mechanism works when the operator physically applies pressure to a pump that increases pressure within the container?

Accepted Answer

A)   Scoop
B)   Manual pump
C)   Stored pressure
D)   Pressure cartridge B

Question 11

What type of portable fire extinguisher is intended for use on Class K fires?

Accepted Answer

A)   Clean agent
B)   Pump-type water
C)   Aqueous film forming foam
D)   Wet chemical stored-pressure D

Question 12

On a multiple marking extinguisher the ratings for each class are:

Accepted Answer

A)   directly related to the others.
B)   only identified by pictographs.
C)   separate, they do not affect each other.
D)   indicators that firefighters should not use them.

Question 13

What type of portable fire extinguisher is discharged in the form of gas and works on Class B and Class C fires?

Accepted Answer

A)   Clean agent
B)   Pump-type water
C)   Carbon dioxide (CO2) 
D)   Wet chemical stored-pressure

Question 14

Signal to others that a portable fire extinguisher is empty by:

Accepted Answer

A)   laying it on its side.
B)   marking it with a tag.
C)   standing it straight up.
D)   covering the hose with a blanket. A

Question 15

Which of the following statements BEST describes how to prevent scattering of lightweight fuels?

Accepted Answer

A)   Wind may be used to allow the agent to reach the fuel surface.
B)   First allow fuel to burn off vapors before applying agent to the fuel surface.
C)   Apply the agent from point where it reaches, but does not disturb, the fuel surface.
D)   Use two extinguishers, alternating application patterns, to apply agent to the fuel surface.

Question 16

What portable fire extinguisher rating is based on the approximate square foot (square meter)  area of flammable liquid a nonexpert operator can extinguish?

Accepted Answer

A)   Class A rating
B)   Class B rating
C)   Class K rating
D)   Multiple markings

Question 17

What portable fire extinguisher rating considers both the toxicity of the extinguishing agent and the toxicity of fumes produced when the agent is applied?

Accepted Answer

A)   Class A rating
B)   Class B rating
C)   Class C rating
D)   Class D rating

Question 18

Which statement BEST describes portable fire extinguisher selection?

Accepted Answer

A)   Extinguisher ratings do not impact selection.
B)   The correct extinguisher will minimize risk to life and property.
C)   The correct extinguisher will always require an expert operator.
D)   All types of extinguishers can be selected regardless of the situation.

Question 19

NFPA 10 requires inspection of portable fire extinguishers at least:

Accepted Answer

A)   after every use.
B)   every three months.
C)   once every six months.
D)   once a year.

Question 20

Portable fire extinguishers should be chosen based on the:

Accepted Answer

A)   heat of the fire.
B)   type of fuel that is burning.
C)   amount of agent required to extinguish the fire.
D)   distance required between the extinguisher and the fire.

Exam 7: Portable Fire Extinguishers

Once the proper extinguisher is selected, you must perform a visual inspection to ensure the extinguisher:

Correct AnswerverifiedShow Answer

What type of portable fire extinguisher may be applied with either an extinguisher or a scoop?

Correct AnswerverifiedShow Answer

How often should portable fire extinguishers be removed from service for maintenance?

Correct AnswerverifiedShow Answer

The P in the PASS acronym stands for:

Correct AnswerverifiedShow Answer

Which method of extinguishing works by excluding oxygen from the burning process?

Correct AnswerverifiedShow Answer

What classification of portable fire extinguisher is used for fires that involve combustible metals and alloys?

Correct AnswerverifiedShow Answer

Do not remove the safety pin on a portable fire extinguisher until:

Correct AnswerverifiedShow Answer

What classification of portable fire extinguisher is used on fires that involve combustible cooking oils?

Correct AnswerverifiedShow Answer

What type of portable fire extinguisher may produce a cloud that reduces visibility when discharged?

Correct AnswerverifiedShow Answer

What expelling mechanism works when the operator physically applies pressure to a pump that increases pressure within the container?

Correct AnswerverifiedB

What type of portable fire extinguisher is intended for use on Class K fires?

Correct AnswerverifiedD

On a multiple marking extinguisher the ratings for each class are:

Correct AnswerverifiedShow Answer

What type of portable fire extinguisher is discharged in the form of gas and works on Class B and Class C fires?

Correct AnswerverifiedShow Answer

Signal to others that a portable fire extinguisher is empty by:

Correct AnswerverifiedA

Which of the following statements BEST describes how to prevent scattering of lightweight fuels?

Correct AnswerverifiedShow Answer

What portable fire extinguisher rating is based on the approximate square foot (square meter) area of flammable liquid a nonexpert operator can extinguish?

Correct AnswerverifiedShow Answer

What portable fire extinguisher rating considers both the toxicity of the extinguishing agent and the toxicity of fumes produced when the agent is applied?

Correct AnswerverifiedShow Answer

Which statement BEST describes portable fire extinguisher selection?

Correct AnswerverifiedShow Answer

NFPA 10 requires inspection of portable fire extinguishers at least:

Correct AnswerverifiedShow Answer

Portable fire extinguishers should be chosen based on the:

Correct AnswerverifiedShow Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
B

Correct Answer
verified
D

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
A

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified