Question 1

You can use the ____ command to gather information about a specific VLAN (instead of listing all VLANs) .

Accepted Answer

A)   cfg vlan [ # ] -status
B)   show vlan [ # ]
C)   sw vlan [ # ]
D)   vlan member [ # ]

Question 2

Bridges use STP to transfer the information about each bridge's MAC address and priority number. The messages the devices send to one another are called ____.

Accepted Answer

A)   STPDU
B)   CBU
C)   BPDU
D)   CBDU

Question 3

Switches default to VTP ____ mode, which means that they can add, rename, and delete VLANs and propagate those changes to the rest of the VTP devices.

Accepted Answer

A)   client
B)   server
C)   transparent
D)   forwarding

Question 4

Routers can implement ____, which increase inter-VLAN security.

Accepted Answer

A)   pruning
B)   access lists
C)   trunking
D)   ILS

Question 5

How do ports on STP-enabled devices move through the different states?

Accepted Answer

Ports on STP-enabled devices move throug...

Question 6

A VLAN may affect layer 3 logical addressing.

Accepted Answer

A) True 
 B)False

Question 7

What are the STP ports transitory states?

Accepted Answer

The transitory states are as follows: Li...

Question 8

Before VLAN was an IEEE standard, early implementations depended on the switch vendor and on a method known as ____________________.

Accepted Answer

The answer of Before VLAN was an IEEE standard, early...

Question 9

Match between columns
                        Premises: a group of network devices that will receive LAN broadcast traffic from each other
the normal operating states of ports when the root bridge is available and all paths are functioning as expected
an IEEE standard governed as 802.1w
a complex process that involved one table for each VLAN and a master table that was shared by all VLANs
manage all of the configured VLANs that traverse trunks between switches
a type of frame tagging
a layer 2 link management protocol designed to prevent looping on bridges and switches
prevent logical loops during a period of transition from one root bridge to another
involves adding a four-byte field to the actual Ethernet frame to identify the VLAN and other pertinent information

Accepted Answer

The Answer of Frame tagging and Broadcast domain and Transitory is...

Question 10

The VTP ____ option reduces the number of VTP updates that traverse a link.

Accepted Answer

A)   transparent
B)   client
C)   server
D)   pruning

Question 11

Describe the two most common types of frame tagging.

Accepted Answer

The two most common types of frame taggi...

Question 12

____ is a layer 2 messaging protocol that manages all the changes to the VLANs across networks.

Accepted Answer

A)   LANE
B)   FDDI
C)   VTP
D)   ISL

Question 13

Compare dynamic vs. static VLANs.

Accepted Answer

Depending on the switch and switch manag...

Question 14

____ links are switch-to-switch or switch-to-router links that can carry traffic from multiple VLANs.

Accepted Answer

A)   Static
B)   Dynamic
C)   Trunk
D)   Access

Question 15

The specification for STP is IEEE ____.

Accepted Answer

A)   802.1d
B)   802.1e
C)   802.1p
D)   802.1q

Question 16

What are the states for a trunk link?

Accepted Answer

You choose from five different states fo...

Question 17

RSTP isn't backward-compatible to 802.1d, so you cannot take advantage of its additional features unless it is running throughout your network.

Accepted Answer

A) True 
 B)False

Question 18

Describe some of the considerations when implementing hubs on a network with VLANs.

Accepted Answer

When implementing hubs on a network that...

Question 19

You can configure a name for each port on a switch.

Accepted Answer

A) True 
 B)False

Question 20

____ VLAN ports can automatically determine their VLAN configuration.

Accepted Answer

A)   Static
B)   Dynamic
C)   Physical
D)   Virtual

Exam 13: Advanced Switching Concepts

____ links are switch-to-switch or switch-to-router links that can carry traffic from multiple VLANs.

Correct Answer
verified

A VLAN may affect layer 3 logical addressing.

Correct Answer
verified

Match each item with a statement below:

____ is a layer 2 messaging protocol that manages all the changes to the VLANs across networks.

Correct Answer
verified

Describe some of the considerations when implementing hubs on a network with VLANs.

Correct Answer
verified
When implementing hubs on a network that...
View Answer

You can use the ____ command to gather information about a specific VLAN (instead of listing all VLANs) .

Correct Answer
verified

The VTP ____ option reduces the number of VTP updates that traverse a link.

Correct Answer
verified

The specification for STP is IEEE ____.

Correct Answer
verified

Routers can implement ____, which increase inter-VLAN security.

Correct Answer
verified

Compare dynamic vs. static VLANs.

Correct Answer
verified
Depending on the switch and switch manag...
View Answer

What are the states for a trunk link?

Correct Answer
verified
You choose from five different states fo...
View Answer

____ VLAN ports can automatically determine their VLAN configuration.

Correct Answer
verified

Before VLAN was an IEEE standard, early implementations depended on the switch vendor and on a method known as ____________________.

Correct Answer
verified

How do ports on STP-enabled devices move through the different states?

Correct Answer
verified
Ports on STP-enabled devices move throug...
View Answer

You can configure a name for each port on a switch.

Correct Answer
verified

What are the STP ports transitory states?

Correct Answer
verified
The transitory states are as follows: Li...
View Answer

RSTP isn't backward-compatible to 802.1d, so you cannot take advantage of its additional features unless it is running throughout your network.

Correct Answer
verified

Bridges use STP to transfer the information about each bridge's MAC address and priority number. The messages the devices send to one another are called ____.

Correct Answer
verified

Switches default to VTP ____ mode, which means that they can add, rename, and delete VLANs and propagate those changes to the rest of the VTP devices.

Correct Answer
verified

Describe the two most common types of frame tagging.

Correct Answer
verified
The two most common types of frame taggi...
View Answer

Exam 13: Advanced Switching Concepts

____ links are switch-to-switch or switch-to-router links that can carry traffic from multiple VLANs.

Correct AnswerverifiedShow Answer

A VLAN may affect layer 3 logical addressing.

Correct AnswerverifiedShow Answer

Match each item with a statement below:

____ is a layer 2 messaging protocol that manages all the changes to the VLANs across networks.

Correct AnswerverifiedShow Answer

Describe some of the considerations when implementing hubs on a network with VLANs.

Correct AnswerverifiedWhen implementing hubs on a network that...View AnswerShow Answer

You can use the ____ command to gather information about a specific VLAN (instead of listing all VLANs) .

Correct AnswerverifiedShow Answer

The VTP ____ option reduces the number of VTP updates that traverse a link.

Correct AnswerverifiedShow Answer

The specification for STP is IEEE ____.

Correct AnswerverifiedShow Answer

Routers can implement ____, which increase inter-VLAN security.

Correct AnswerverifiedShow Answer

Compare dynamic vs. static VLANs.

Correct AnswerverifiedDepending on the switch and switch manag...View AnswerShow Answer

What are the states for a trunk link?

Correct AnswerverifiedYou choose from five different states fo...View AnswerShow Answer

____ VLAN ports can automatically determine their VLAN configuration.

Correct AnswerverifiedShow Answer

Before VLAN was an IEEE standard, early implementations depended on the switch vendor and on a method known as ____________________.

Correct AnswerverifiedShow Answer

How do ports on STP-enabled devices move through the different states?

Correct AnswerverifiedPorts on STP-enabled devices move throug...View AnswerShow Answer

You can configure a name for each port on a switch.

Correct AnswerverifiedShow Answer

What are the STP ports transitory states?

Correct AnswerverifiedThe transitory states are as follows: Li...View AnswerShow Answer

RSTP isn't backward-compatible to 802.1d, so you cannot take advantage of its additional features unless it is running throughout your network.

Correct AnswerverifiedShow Answer

Bridges use STP to transfer the information about each bridge's MAC address and priority number. The messages the devices send to one another are called ____.

Correct AnswerverifiedShow Answer

Switches default to VTP ____ mode, which means that they can add, rename, and delete VLANs and propagate those changes to the rest of the VTP devices.

Correct AnswerverifiedShow Answer

Describe the two most common types of frame tagging.

Correct AnswerverifiedThe two most common types of frame taggi...View AnswerShow Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
When implementing hubs on a network that...
View Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
Depending on the switch and switch manag...
View Answer

Correct Answer
verified
You choose from five different states fo...
View Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
Ports on STP-enabled devices move throug...
View Answer

Correct Answer
verified

Correct Answer
verified
The transitory states are as follows: Li...
View Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
The two most common types of frame taggi...
View Answer