Question 1

The ____ line is either a thick (heavy)  line with one long and two short dashes or a series of thick (heavy) , equally spaced long dashes.

Accepted Answer

A)   perspective plane
B)   reference plane
C)   cutting plane
D)   dimension plane

Question 2

Describe how cross-hatch or section lines are placed on a single piece object.

Accepted Answer

For single piece objects, thes...

Question 3

The inside details of such an object shown with an exterior view are shown on the drawing by ____ lines.

Accepted Answer

A)   object
B)   dimension
C)   extension
D)   hidden

Question 4

In the accompanying figure, the letters identify the ____.

Accepted Answer

A)   direction
B)   section
C)   viewing plane
D)   cutting plane

Question 5

A(n)  ____ view uses a centerline instead of a cutting plane to indicate where a section has been taken and rotated 90 ° .

Accepted Answer

A)   full section
B)   revolved section
C)   partial section
D)   inverted section

Question 6

Explain the revolved section view.

Accepted Answer

A revolved section view uses a...

Question 7

What is needed when the details inside the part become more complex?

Accepted Answer

As the details inside the part become more complex, additional invisible lines are needed to show the hidden details accurately. This tends to make the drawing increasingly more difficult to interpret. One technique used on such drawings to simplify them is to cut away a portion of the object, resulting in a sectional view. This exposes the inside surfaces. On cutaway sections, all of the edges that are visible are represented by visible edge or object lines.

Question 8

Describe the cutting plane lines.

Accepted Answer

The cutting plane line is either a thick...

Question 9

If the cutting plane passes completely through the object, the sectional view is called a(n)  ____.

Accepted Answer

A)   lateral view
B)   orthogonal section
C)   full section
D)   cross view C

Question 10

In the accompanying figure, the item identified as number 4 identifies materials made of ____.

Accepted Answer

A)   aluminum and magnesium
B)   steel
C)   brass, bronze, copper, and compositions
D)   cast iron

Question 11

Describe the removed section method.

Accepted Answer

One technique used to show the shape and size of a specific area of an object is a removed section. This method uses a cutting plane showing where a section has been taken, removed from the view, labeled, and relocated on a drawing sheet of the object. If necessary, it can be enlarged and dimensioned.

Exam 26: Cutting Planes, Full Sections, and Section Lining

The ____ line is either a thick (heavy) line with one long and two short dashes or a series of thick (heavy) , equally spaced long dashes.

Correct Answer
verified

Describe how cross-hatch or section lines are placed on a single piece object.

Correct Answer
verified
For single piece objects, thes...
View Answer

The inside details of such an object shown with an exterior view are shown on the drawing by ____ lines.

Correct Answer
verified

In the accompanying figure, the letters identify the ____.

Correct Answer
verified

A(n) ____ view uses a centerline instead of a cutting plane to indicate where a section has been taken and rotated 90 ° .

Correct Answer
verified

Explain the revolved section view.

Correct Answer
verified
A revolved section view uses a...
View Answer

What is needed when the details inside the part become more complex?

Describe the cutting plane lines.

Correct Answer
verified
The cutting plane line is either a thick...
View Answer

If the cutting plane passes completely through the object, the sectional view is called a(n) ____.

Correct Answer
verified
C

In the accompanying figure, the item identified as number 4 identifies materials made of ____.

Correct Answer
verified

Describe the removed section method.

Exam 26: Cutting Planes, Full Sections, and Section Lining

The ____ line is either a thick (heavy) line with one long and two short dashes or a series of thick (heavy) , equally spaced long dashes.

Correct AnswerverifiedShow Answer

Describe how cross-hatch or section lines are placed on a single piece object.

Correct AnswerverifiedFor single piece objects, thes...View AnswerShow Answer

The inside details of such an object shown with an exterior view are shown on the drawing by ____ lines.

Correct AnswerverifiedShow Answer

In the accompanying figure, the letters identify the ____.

Correct AnswerverifiedShow Answer

A(n) ____ view uses a centerline instead of a cutting plane to indicate where a section has been taken and rotated 90 ° .

Correct AnswerverifiedShow Answer

Explain the revolved section view.

Correct AnswerverifiedA revolved section view uses a...View AnswerShow Answer

What is needed when the details inside the part become more complex?

Describe the cutting plane lines.

Correct AnswerverifiedThe cutting plane line is either a thick...View AnswerShow Answer

If the cutting plane passes completely through the object, the sectional view is called a(n) ____.

Correct AnswerverifiedC

In the accompanying figure, the item identified as number 4 identifies materials made of ____.

Correct AnswerverifiedShow Answer

Describe the removed section method.

Correct Answer
verified

Correct Answer
verified
For single piece objects, thes...
View Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
A revolved section view uses a...
View Answer

Correct Answer
verified
The cutting plane line is either a thick...
View Answer

Correct Answer
verified
C

Correct Answer
verified