Question 1

What is the first step in collecting RF information?

Accepted Answer

A)   position the access point
B)   note the objects and layout of the room
C)   document AP position
D)   walk around room to test signal

Question 2

What is a spectrum analyzer?

Accepted Answer

A spectrum analyzer scans the radio freq...

Question 3

The ____ setting of a site survey analyzer specifies the AP that will be involved in the test.

Accepted Answer

A)   Destination MAC Address
B)   Continuous Link Test
C)   Packet Tx Type
D)   Delay Between Packets

Question 4

The first step in collecting RF information is to position the access point in what may appear to be the most logical location.

Accepted Answer

A) True 
 B)False  False

Question 5

What are the parts of a site survey report?

Accepted Answer

A)   introduction section, graphical section
B)   narrative section, graphical section
C)   data section, conclusion section
D)   data section, recommendation section

Question 6

A(n) ____________________ transmission means that a frame is sent from one sender to multiple receivers with a single "transmit" operation.

Accepted Answer

The answer of A(n) ____________________ transmission means that a frame...

Question 7

A drawback of spectrum analyzers is that the information is displayed in graphical form and not as raw data.

Accepted Answer

A) True 
 B)False

Question 8

What are the steps involved in gathering data for a site survey?

Accepted Answer

Gathering data for a site survey involve...

Question 9

What is a consideration when conducting an outdoor site survey?

Accepted Answer

A)   climate conditions
B)   foliage
C)   permits and zoning
D)   All of the above D

Question 10

What affects the coverage pattern?

Accepted Answer

A)   wireless protocol
B)   objects that interfere with the RF signal
C)   notebook operating system
D)   skill of person conducting site survey

Question 11

What is a requirement for an access point used in a site survey?

Accepted Answer

A)   built-in battery
B)   external antenna connectors
C)   fixed power levels
D)   All of the above

Question 12

In a site survey analyzer, vendors use an algorithm or a lookup table to convert ____ values to dBm, mW, or signal strength percentage.

Accepted Answer

A)   GHz
B)   MAC
C)   RSSI
D)   RFID

Question 13

Users need higher data rates for time-bound transmissions, such as audio and video and therefore need higher ____________________.

Accepted Answer

The answer of Users need higher data rates for time-bound...

Question 14

When is the best time to perform a site survey?

Accepted Answer

A)   quarterly
B)   monthly
C)   daily
D)   prior to installing a WLAN

Question 15

What type of AP antenna is most commonly used in a site survey?

Accepted Answer

A)   omnidirectional
B)   semi-directional
C)   highly-directional
D)   parabolic A

Question 16

What should you be sure to do when collecting RF information?

Accepted Answer

A)   take pictures of your location as you move around
B)   connect to the Internet and download a file to test bandwidth
C)   write down your perception of connection speed
D)   observe the data being displayed by the software measurement tools

Question 17

What should be included in a site survey report?

Accepted Answer

Purpose of the report
Survey methods
RF ...

Question 18

In addition to access points, what wireless tool(s) are required for a site survey?

Accepted Answer

In addition to access points, another es...

Question 19

What affects transmission range?

Accepted Answer

A)   distance only
B)   objects in path only
C)   distance and objects in path
D)   wireless protocol

Question 20

What provides the greatest source of RF interference?

Accepted Answer

A)   mirror
B)   interior wall
C)   desk
D)   chair

Exam 7: Conducting a Site Survey

What is the first step in collecting RF information?

Correct AnswerverifiedShow Answer

What is a spectrum analyzer?

Correct AnswerverifiedA spectrum analyzer scans the radio freq...View AnswerShow Answer

The ____ setting of a site survey analyzer specifies the AP that will be involved in the test.

Correct AnswerverifiedShow Answer

The first step in collecting RF information is to position the access point in what may appear to be the most logical location.

Correct AnswerverifiedFalse

What are the parts of a site survey report?

Correct AnswerverifiedShow Answer

A(n) ____________________ transmission means that a frame is sent from one sender to multiple receivers with a single "transmit" operation.

Correct AnswerverifiedShow Answer

A drawback of spectrum analyzers is that the information is displayed in graphical form and not as raw data.

Correct AnswerverifiedShow Answer

What are the steps involved in gathering data for a site survey?

Correct AnswerverifiedGathering data for a site survey involve...View AnswerShow Answer

What is a consideration when conducting an outdoor site survey?

Correct AnswerverifiedD

What affects the coverage pattern?

Correct AnswerverifiedShow Answer

What is a requirement for an access point used in a site survey?

Correct AnswerverifiedShow Answer

In a site survey analyzer, vendors use an algorithm or a lookup table to convert ____ values to dBm, mW, or signal strength percentage.

Correct AnswerverifiedShow Answer

Users need higher data rates for time-bound transmissions, such as audio and video and therefore need higher ____________________.

Correct AnswerverifiedShow Answer

When is the best time to perform a site survey?

Correct AnswerverifiedShow Answer

What type of AP antenna is most commonly used in a site survey?

Correct AnswerverifiedA

What should you be sure to do when collecting RF information?

Correct AnswerverifiedShow Answer

What should be included in a site survey report?

Correct AnswerverifiedPurpose of the reportSurvey methodsRF ...View AnswerShow Answer

In addition to access points, what wireless tool(s) are required for a site survey?

Correct AnswerverifiedIn addition to access points, another es...View AnswerShow Answer

What affects transmission range?

Correct AnswerverifiedShow Answer

What provides the greatest source of RF interference?

Correct AnswerverifiedShow Answer

Correct Answer
verified

Correct Answer
verified
A spectrum analyzer scans the radio freq...
View Answer

Correct Answer
verified

Correct Answer
verified
False

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
Gathering data for a site survey involve...
View Answer

Correct Answer
verified
D

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
A

Correct Answer
verified

Correct Answer
verified
Purpose of the report
Survey methods
RF ...
View Answer

Correct Answer
verified
In addition to access points, another es...
View Answer

Correct Answer
verified

Correct Answer
verified