A) Leaky hoses
B) Fluid on the ground under the engine compartment
C) Dripping fluids coming off the engine or transmission
D) All of the above
Correct Answer
verified
Multiple Choice
A) High beam indicator
B) Turn signals indicators
C) Emergency four-way flashers
D) All of the above
Correct Answer
verified
Multiple Choice
A) Fire extinguisher
B) Jumper cables
C) Spare fuses
D) Three emergency triangles
Correct Answer
verified
Multiple Choice
A) 25 miles
B) 50 miles
C) 75 miles
D) 100 miles
Correct Answer
verified
Multiple Choice
A) Check the air ride suspension for damage or leaks.
B) Test the system to ensure that it is working properly.
C) Report any problems they find.
D) All of the above
Correct Answer
verified
Multiple Choice
A) Dual tires should not touch one another.
B) Using mismatched tire sizes is okay on commercial vehicles.
C) Valve stems should not be cracked or cut.
D) Retread tires are not allowed on the front wheels of a bus.
Correct Answer
verified
Multiple Choice
A) Hoses
B) Pumps
C) Fluid level
D) Steering wheel play
E) All of the above
Correct Answer
verified
Multiple Choice
A) To check the horn
B) Not to check the horn
C) It is up to the driver.
D) It is up to the test examiner.
Correct Answer
verified
Multiple Choice
A) Front tires have at least 4/32 inch of tread depth
B) Non-front tires have at least 2/32 inch tread depth
C) No tires have signs of fabric showing through sidewall or tread
D) All of the above
Correct Answer
verified
Multiple Choice
A) Proper inflation
B) Tread depth on all tires
C) Damage to treads or sidewalls
D) All of the above
Correct Answer
verified
Multiple Choice
A) To have or show spare wiper blades
B) To inspect blades for damage
C) To ensure that wipers work properly
D) To inspect wiper arms for damage
Correct Answer
verified
Multiple Choice
A) Ensure battery is secure
B) Ensure connections are tight
C) Check for corrosion
D) Test for battery voltage
Correct Answer
verified
Multiple Choice
A) Depress the clutch
B) Place the gearshift lever in neutral
C) Start the engine and release clutch slowly
D) All of the above
Correct Answer
verified
Multiple Choice
A) The drive shaft should not be bent.
B) The drive shaft should not have cracks in it.
C) The driver shaft couplings should not be secure.
D) The driver shaft should be free of foreign objects.
Correct Answer
verified
Multiple Choice
A) That the oil pressure is not increasing
B) That the oil pressure is increasing
C) That the warning light is on and stays on
D) None of the above
Correct Answer
verified
Multiple Choice
A) Broken welds
B) Cracks in the frame
C) Damage to the longitudinal frame
D) Damage to cross members
E) All of the above
Correct Answer
verified
Multiple Choice
A) Verbally explain what they would do during the inspection to the examiner.
B) Identify specific parts and explain why they are inspecting those parts.
C) Perform basic maintenance on the engine (i.e., check the oil, water, etc.) .
D) Inspect only the engine and chassis of the vehicle.
Correct Answer
verified
Multiple Choice
A) Start the engine, press down on the brake pedal and hold for five seconds.
B) Without starting the engine, press down on the brake pedal and hold for five seconds.
C) Start the engine, pump the brakes several times, then hold for five seconds.
D) None of the above applies to hydraulic brakes.
Correct Answer
verified
Multiple Choice
A) Every state requires applicants to pass a pre-trip inspection test.
B) The vehicle inspection test is a written test only.
C) The vehicle inspection exam is not mandatory.
D) Only Class A applicants must take the pre-trip inspection test.
Correct Answer
verified
Multiple Choice
A) How to test the air leakage rate
B) How to test for air brake leaks
C) How to set spring brakes
D) How to check the air pressure rate
E) All of the above
Correct Answer
verified
Showing 1 - 20 of 36