Question 1

Match the following RAM memory modules with the number of pins:
-SDRAM

Accepted Answer

A)   30 pins
B)   168 pins
C)   184 pins
D)   240 pins
E)   240 pins.F)  232 pins

Question 2

All desktops provide support for ECC and should be enabled or disabled through the system BIOS.

Accepted Answer

A) True 
 B)False

Question 3

What memory module has a different pinout on each side?

Accepted Answer

A)   SIMM
B)   SIPP
C)   SODIMM
D)   DIMM

Question 4

A RAM tester can be used to test all the following options except ________?

Accepted Answer

A)   Heat test and stress test
B)   Separating good RAM from bad RAM
C)   Determining memory type, size, and true speed
D)   Detecting current stability D

Question 5

What type of memory treats two matching modules as a single unit?

Accepted Answer

A)   Twofold
B)   Dual-channel
C)   Single-channel
D)   DDR2

Question 6

Match the following RAM memory modules with the number of pins:
-RAMBUS

Accepted Answer

A)   30 pins
B)   168 pins
C)   184 pins
D)   240 pins
E)   240 pins.F)  232 pins

Question 7

Match the following RAM memory modules with the number of pins:
-DDR3-SDRAM

Accepted Answer

A)   30 pins
B)   168 pins
C)   184 pins
D)   240 pins
E)   240 pins.F)  232 pins

Question 8

Match the following memory DDR3 memory types with the correct bus and transfer speed. There are more answers than are needed.
-PC3-10666

Accepted Answer

A)   Bus Speed 667 MHz, Transfer Speed 1333 MHz
B)   Bus Speed 400 MHz, Transfer Speed 800 MHz
C)   Bus Speed 1000MHz, Transfer Speed 2000 MHz
D)   Bus Speed 553MHz, Transfer Speed 1066 MHz
E)   Bus Speed 900MHz, Transfer Speed 1800 MHzF)  Bus Speed 800MHz, Transfer Speed 1600 MHzG)  Bus Speed 560MHz, Transfer Speed 1120 MHz

Question 9

Match the following memory module types:
-EDO

Accepted Answer

A)   Volatile memory whose contents can be changed or lost after power is switched off
B)   Volatile memory whose contents require far less electricity and remains too bulky to use as main RAM
C)   Volatile memory whose contents require frequent electrical refreshes and remains the slowest type of RAM
D)   Dynamic RAM that must be installed in pairs with remaining sockets being occupied by a continuity module
E)   A type of memory module whose contents contains a pinout on both sides of the moduleF)  A type of memory module that uses a compact version of the standard DIMM moduleG)  A type of memory module whose contents contains a different pinout on each side of the moduleH)  A special type of memory that enables a system to correct single-bit errors and notify you of larger errorsI)  A variation of DRAM used among Pentium systems and video cards

Question 10

SIMM modules are designed to be installed in either direction, elevating the possibility of installing the modules backward.

Accepted Answer

A) True 
 B)False

Question 11

Dual inline memory modules are available in all the following pin sizes except for ________?

Accepted Answer

A)   168 pin
B)   184 pin
C)   240 pin
D)   268 pin

Question 12

Which of the following is the name for running the processor or memory at speeds faster than what is recommended?

Accepted Answer

A)  CPU tweaking
B)  Overclocking
C)  Memory leak
D)  CPU duplicating B

Question 13

Match the following memory module types:
-SODIMM

Accepted Answer

A)   Volatile memory whose contents can be changed or lost after power is switched off
B)   Volatile memory whose contents require far less electricity and remains too bulky to use as main RAM
C)   Volatile memory whose contents require frequent electrical refreshes and remains the slowest type of RAM
D)   Dynamic RAM that must be installed in pairs with remaining sockets being occupied by a continuity module
E)   A type of memory module whose contents contains a pinout on both sides of the moduleF)  A type of memory module that uses a compact version of the standard DIMM moduleG)  A type of memory module whose contents contains a different pinout on each side of the moduleH)  A special type of memory that enables a system to correct single-bit errors and notify you of larger errorsI)  A variation of DRAM used among Pentium systems and video cards

Question 14

Match the following RAM memory modules with the number of pins:
-DDR-SDRAM

Accepted Answer

A)   30 pins
B)   168 pins
C)   184 pins
D)   240 pins
E)   240 pins.F)  232 pins

Question 15

Match the following memory module types:
-SRAM

Accepted Answer

A)   Volatile memory whose contents can be changed or lost after power is switched off
B)   Volatile memory whose contents require far less electricity and remains too bulky to use as main RAM
C)   Volatile memory whose contents require frequent electrical refreshes and remains the slowest type of RAM
D)   Dynamic RAM that must be installed in pairs with remaining sockets being occupied by a continuity module
E)   A type of memory module whose contents contains a pinout on both sides of the moduleF)  A type of memory module that uses a compact version of the standard DIMM moduleG)  A type of memory module whose contents contains a different pinout on each side of the moduleH)  A special type of memory that enables a system to correct single-bit errors and notify you of larger errorsI)  A variation of DRAM used among Pentium systems and video cards

Question 16

Parity checking is available and supported by all types of memory modules and motherboards.

Accepted Answer

A) True 
 B)False

Question 17

What type of memory module is most likely found in systems with space restrictions and requires a smaller alternative to a DIMM?

Accepted Answer

A)   RDRAM
B)   SODIMM
C)   SIPP
D)   SIMM

Question 18

Empty RIMM sockets must be occupied by a ______ to properly terminate electrical signals on the motherboard.

Accepted Answer

A)   Continuity tester
B)   Continuity termination
C)   Continuity module
D)   Continuity toolkit

Question 19

On systems that use SIMMs, they can also use DIMMS, or double-sided SIMMs.

Accepted Answer

A) True 
 B)False  False

Question 20

All the following can generate a parity error except ________?

Accepted Answer

A)   Memory module/chip dedicated to support parity
B)   Mixing parity and nonparity RAM on parity-checked systems
C)   Mixing slow and fast RAM in the same bank or on the same motherboard
D)   Memory module/chip failure

Exam 5: Ram

Match the following RAM memory modules with the number of pins: -SDRAM

Correct AnswerAnswered by ExamLex AIShow Answer

All desktops provide support for ECC and should be enabled or disabled through the system BIOS.

Correct AnswerverifiedShow Answer

What memory module has a different pinout on each side?

Correct AnswerverifiedShow Answer

A RAM tester can be used to test all the following options except ________?

Correct AnswerverifiedD

What type of memory treats two matching modules as a single unit?

Correct AnswerverifiedShow Answer

Match the following RAM memory modules with the number of pins: -RAMBUS

Correct AnswerAnswered by ExamLex AIShow Answer

Match the following RAM memory modules with the number of pins: -DDR3-SDRAM

Correct AnswerAnswered by ExamLex AIShow Answer

Match the following memory DDR3 memory types with the correct bus and transfer speed. There are more answers than are needed. -PC3-10666

Correct AnswerAnswered by ExamLex AIShow Answer

Match the following memory module types: -EDO

Correct AnswerAnswered by ExamLex AIShow Answer

SIMM modules are designed to be installed in either direction, elevating the possibility of installing the modules backward.

Correct AnswerverifiedShow Answer

Dual inline memory modules are available in all the following pin sizes except for ________?

Correct AnswerverifiedShow Answer

Which of the following is the name for running the processor or memory at speeds faster than what is recommended?

Correct AnswerverifiedB

Match the following memory module types: -SODIMM

Correct AnswerAnswered by ExamLex AIShow Answer

Match the following RAM memory modules with the number of pins: -DDR-SDRAM

Correct AnswerAnswered by ExamLex AIShow Answer

Match the following memory module types: -SRAM

Correct AnswerAnswered by ExamLex AIShow Answer

Parity checking is available and supported by all types of memory modules and motherboards.

Correct AnswerverifiedShow Answer

What type of memory module is most likely found in systems with space restrictions and requires a smaller alternative to a DIMM?

Correct AnswerverifiedShow Answer

Empty RIMM sockets must be occupied by a ______ to properly terminate electrical signals on the motherboard.

Correct AnswerverifiedShow Answer

On systems that use SIMMs, they can also use DIMMS, or double-sided SIMMs.

Correct AnswerverifiedFalse

All the following can generate a parity error except ________?

Correct AnswerverifiedShow Answer

Correct Answer
Answered by ExamLex AI

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
D

Correct Answer
verified

Correct Answer
Answered by ExamLex AI

Correct Answer
Answered by ExamLex AI

Correct Answer
Answered by ExamLex AI

Correct Answer
Answered by ExamLex AI

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
B

Correct Answer
Answered by ExamLex AI

Correct Answer
Answered by ExamLex AI

Correct Answer
Answered by ExamLex AI

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
False

Correct Answer
verified